Auiliary clip lamp magnifier bakeng sa welding

Auiliary clip desk lamp magnifier for welding Featured Image

Tlhaloso e Khutšoanyane:

Auxiliary Clip Clamp Magnifier,Helping Third Hand Magnifying Glass,Desk Lamp Helping Hand Repair Clamp Alligator Auxiliary Clip Stand Desktop loupes

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Litaba tsa Sehlahisoa

Mohlala:	MG16126-A	MG16129-C	MG16130-108C	MG16126	TE-806	MG16130
Matla:	3.5x/12x	2.5x/7.5x/10x	2.5x/6x/5x/10x	3x	3x	3x
Bophara ba lense:	65mm/17mm	90/34/34 limilimithara	108/21/30/30mm	62 limilimithara	60 limilimithara	62 limilimithara
Lisebelisoa tsa lense:	Lense ea Optical Arylic	Lense ea khalase	Lense ea Optical Arylic	Lense ea khalase	Lense ea khalase	Lense ea khalase
Boima bo le bong:	387g	617G	950G	475g	710g	500g
Boholo bo le bong:	120x100x150mm	170x120x100mm	282X182X170MM	150x80x125mm	260x183x180mm	263x185x55mm
Likhomphutha/ lebokose	54pcs	24PCS	16PCS	40pcs	20pcs	40pcs
Boima/lebokose:	21kg	17KG	17KG	20kg	14.5kg	22kg
Boholo ba lebokose:	50x38x41cm	50X30X38CM	71X38X60CM	52x41x16cm	38x25x38cm	52x41x16cm
Lebone la LED	Ee	Ee	Ee	No	No	No
Tlhaloso e Khutšoanyane:	MG16126-A Letsoho le Thusang la LEDMohoeletsika Clip for Repair	Morekisi Desk-topMohoeletsiKhalase e Holisang ea LED ea MG16129-C E Nang le Boemo	MG16130-108C Welding Helping Hands Auiliary Clip Spring DeskSehlahisoa sa Lebone	MG16126 Seholo se Thusang Ka letsoho se Holisang Khalase ka Setulo sa Soldering	Multifunctional magnifying glass for welding care	MG16130 tse tharo tse holisang letsoho tse nang le ts'ehetso ea tšepe ea chrome

Li-auiliary clip magnifiers ke lisebelisoa tse thusang molemong oa ho etsa soldering le ho etsa mohlala.

Lintlha tsa MG16126-A

1) Lense ea Bifocal, e fana ka kholo ea maemo a mabeli.
2) Ka setsi sa tšepe ema holim'a deske.
3) Ka leseli la LED le ka sebelisoa ho se tsilatsile ho tloha leseling.
4) Ka molala o tenyetsehang oa khantsi, bophahamo ba lense bo fetoha habonolo
5) Ka li-clamps tse 2 tse thusang, li ka tšoara likarolo tse ts'oarellang le ho etsa matsoho mahala.
6) Ka sesebelisoa sa lisebelisoa tsa selemo, bakeng sa ho bea lisebelisoa tse bonolo.
7) Libetri tsa 3 AAA bakeng sa phepelo ea motlakase

MG16126-A LED Helping Hand Magnifier with Clip for Repair 02

Lintlha tsa MG16129-C

1) E tla le lense e kholo ea 90mm le lilense tse peli tse nyane tsa 34mm
2) Katoloso ea boemo ba 3: 2.5X, 7.5X, 10X
3) Ka letsoho le thusang ho tšoara PCB, lisebelisoa tsa elektroniki joalo-joalo.
4) 5 mabone a khanyang a LED a fana ka leseli le lekaneng 'me a ka fetoloa
5) E tla le lisebelisoa tsa selemo tse ts'oereng sebaka, tse ka behang lisebelisoa tse thusang
joalo ka screwdriver,forceps, tweezers, thepa ea ho sebelisa joalo-joalo
6) Bophahamo ba ho sebetsa ba lense bo ka fetoloa ho feta 170mm

Wholesale Desk-top Magnifier MG16129-C LED Magnifying Glass With Stand 02

Likarolo tsa MG16130-108C

1) 18 LED Light Magnifier Desk Lamp Thusa Ho Lokisa Matsoho ka Clip Desktronic op Magnifying Glass for Electronic PCB Circuit Board
2) Sesebelisoa se loketseng ha letsoho la boraro le hlokahala.
3) Mefuta e 4 ea lense e hōlisang: 2.5X 108mm (bophara), 5X 30mm, 6X 30mm, 10X 21mm.Leseli le khanyang le ikemetseng le nang le li-pcs tse 18 tsa LED li kentsoe holim'a tube ea tšepe e tenyetsehang.
4) Sebaka le sebaka sa mabone se ka fetoloa ka bolokolohi.E ka sebelisoa e le lebone la deske.Li-clamp tsa tšehetso le likotoana tsa li-alligator lia khona ho fetoha, Ka ho hōlisa ka mokhoa o feto-fetohang, lilense tse peli tse thusang lia otlolla le ho fetoha, ho etsa hore ts'ebetso e phutholohe haholoanyane.
5) E tsamaisoa ke adaptara ea matla a kantle.Mofuta oa kopo: tjheseletso ea elektroniki, ho etsa mohlala, ho bokella litempe, ho roka, lintho tsa khale, tlhahlobo ea baeloji, ho bala, jj.
7) Khanya ea maemo a mabeli.

MG16130-108C Welding Helping Hands Auiliary Clip Spring Desk Lamp Magnifier 02

Likarolo tsa MG16126 /MG16130/TE-806:

1) Cast steel base e amoheloa, e tsitsitseng, e tšoarellang le e tiileng.
2) Li-clamp tse thusang tse fapaneng, ho holisa le ho fetoha kaofela lia fumaneha
3) Ka khalase e holisang ea 3x.
4) E entsoe ka khalase e holisang, matsoho a habeli a mochini le lisebelisoa tse koalang.Likarolo tsena tse tharo li ka potoloha ka tsela efe kapa efe.Li sebelisoa haholo tlhokomelong ea mehala ea cellular le microelectronics.Ke sesebelisoa sa ho lokisa se nepahetseng se nang le mefuta e mengata ea ts'ebeliso.
5) Lintho tse bonahalang: chrome plated metal foreimi e entsoeng ka tšepe.
6) manipulator e tšehetsoa ke manipulator e tsamaeang.Ho na le likotoana tse peli tse tšehetsang, tse loketseng ho lokisa lintho.E ka potoloha le ho lokisoa ka tsela efe kapa efe.E sebelisa khalase e holisang ho sheba ka hloko le ho nka linepe tse kholo tsa lintho tse nyane.Ke sesebelisoa se sebelisoang haholo.